flowRPI 1

Basic module information

Part number: 10-FY07ZAA080CR01-L445B18
Product line: flowRPI 1
Product status: In qualification
Break down voltage: 650 V
Nominal chip current rating: 80 A
Standard Packing Quantity: 100
Module datasheet: PDF, 443 kB

Product details

Topology: PIM+PFC (CIP)
  • Dual PFC with ultrafast boost diode for interleave operation
  • Integrated capacitor and temperature sensor
  • Open Emitter configuration
  • Single-phase Converter+PFC+Inverter
  • Temperature sensor
  • Ultrafast switching with MOSFET
Chip technology (main switch): Infineon CoolMOS™ C6
  • Easy to use / drive
  • Extremly low losses
  • Very high commutation ruggedness
Base isolation (e.g. ceramic): Al2O3
Electrical interconnection: Solder pin

Housing related details

Module housing: flow 1
Mechanical connection to the PCB: 4 towers
Footprint: 82 mm x 37.4 mm
Height: 12 mm
  • Convex shaped substrate for superior thermal contact
  • Thermo-mechanical push-and-pull force relief

Related info

  • Protection of thermal interface material - Procap

    ProCaps protect thermal interface material against contamination.

  • Handling instruction  PDF, 3 MB

    The handling instruction gives information during the design phase of the application and for usage in the production.
    To ensure a proper long term stability and reliability of the power module in the application details about the PCB requirements, heat sinks and thermal interface material as well as instructions on the assembly process are shown.

  • Packaging datasheet  PDF, 137 kB

    The package data gives information about dimensions of the housing.

  • 3D module outline (STEP)  STP, 490 kB

    The 3D step file can be downloaded for the implementation into your CAD system.

  • Power module datasheet explanation PDF, 4 MB

    Explanation of measurement conditions and data sources used in Vincotech’s power module datasheets.

  • Product Qualification at Vincotech PDF, 293 kB

    Vincotech’s qualification tests follow the minimum requirements for the series release of power modules described in this document. These tests also apply for release and re-qualification of modified products.

  • UL (Underwriters laboratories)  PDF, 309 kB

    Vincotech power modules are recognized by UL (Underwriters Laboratories). The UL Mark indicates that UL has tested representative samples of the product and found it to be compliant with the applicable standard or other requirements with respect to its potential risk of fire, electric shock and mechanical hazards.

  • RoHS  PDF, 323 kB

    All Vincotech standard power modules comply with the RoHS specification.

Contact us For technical questions about this product, please contact us here: