flowIPM 1C (CIB)
Basic module information
|Product line:||flowIPM 1C (CIB)|
|Product status:||Series production|
|Break down voltage:||1200 V|
|Nominal chip current rating:||15 A|
|Standard Packing Quantity:||90|
|Module datasheet:||PDF, 5 MB|
- Brake Chopper
- Complete Bootstrap Circuit
- Emitter Shunts
- Gate Drive for Brake
- Open Emitter configuration
- Temperature sensor
|Chip technology (main switch):||IGBT4|
- Easy paralleling
- Low turn-off losses
- Low collector emitter saturation voltage
- Positive temperature coefficient
- Short tail current
|Base isolation (e.g. ceramic):||Al2O3|
|Electrical interconnection:||Solder pin|
Housing related details
|Module housing:||flow 1C|
|Mechanical connection to the PCB:||4 towers|
|Footprint:||72 mm x 52 mm|
- Ceramic substrate for Thick-film based designs
- Thermo-mechanical push-and-pull force relief
PDF, 695 kB
The handling instruction gives information during the design phase of the application and for usage in the production.
To ensure a proper long term stability and reliability of the power module in the application details about the PCB requirements, heat sinks and thermal interface material as well as instructions on the assembly process are shown.
PDF, 486 kB
The package data gives information about dimensions of the housing.
3D module outline (STEP)
STP, 1 MB
The 3D step file can be downloaded for the implementation into your CAD system.
Product Qualification at Vincotech
PDF, 293 kB
Vincotech’s qualification tests follow the minimum requirements for the series release of power modules described in this document. These tests also apply for release and re-qualification of modified products.
UL (Underwriters laboratories)
Vincotech power modules are recognized by UL (Underwriters Laboratories). The UL Mark indicates that UL has tested representative samples of the product and found it to be compliant with the applicable standard or other requirements with respect to its potential risk of fire, electric shock and mechanical hazards.
PDF, 323 kB
All Vincotech standard power modules comply with the RoHS specification.