Application Notes & Reference Designs
Vincotech's Application Notes are available to support with new designs. There are Reference Designs as well explaining the use of Evaluations board for Vincotech's Power Modules.
Module Mechanics and Packaging
| Document | Type | Date |
|---|---|---|
| Power Modules with Phase-Change Material | Application Note | 07/2012 |
| Advantages of Vincotech's Power Modules with Press-fit Technology | Application Note | 04/2012 |
| Isolation Test of the Temperature Sensor in the P8X, P18X, P48X Modules | Application Note | 05/2005 |
| Improved PCB-Layout with Flow Through Power Modules | Application Note | 09/2004 |
| Mechanic Interaction of Module, PCB and Heat Sink in Power Applications | Application Note | 10/2004 |
^ top
Simulation and Thermal Design
| Document | Type | Date |
|---|---|---|
| Improved Thermal Interface for Direct Pressed Power Modules | Application Note | 09/2007 |
| FlowSIM New Innovative Electrical and Thermal Simulation Method for Power Modules in Inverter Applications. | Application Note | 05/2007 |
| Influence of Thermal Cross Coupling at Power Modules (PCIM-Europe 2006) | Application Note | 06/2005 |
^ top
Fast Switching / Active PFC with Power Modules
| Document | Type | Date |
|---|---|---|
| Power Module with Additional Low Inductive Current Path | Application Note | 03/2010 |
| Advantages of SiC Schottky Diodes in Fast Switching Power Electronics Solutions | Application Note | 08/2007 |
| Fast Switching Power Module Solutions for Applications with 1200V Component Rating (PCIM-Europe 2006) | Application Note | 07/2006 |
| New Power Module Structure for Efficiency Improvement in Fast Switching Power Applications | Application Note | 03/2005 |
| Modules as an Instrument for Low Inductive System Designs | Application Note | 10/2004 |
| 2nd Generation of PFC Solutions / High Efficiency PFC | Application Note | 09/2004 |
| Active PFC with Inrush Limitation and Short Circuit Protection | Application Note | 09/2004 |
| PFC Fundamentals 2: Active Power Factor Correction Principle of Operation | Application Note | 09/2004 |
| PFC-Fundamentals 1: Sinusoidal Current Sourcing from the Public Power Grid | Application Note | 05/2004 |
^ top
Solar Inverter
| Document | Type | Date |
|---|---|---|
| Design Concept for a Transformerless Solar Inverter | Application Note | 12/2009 |
|
Advantages of NPC Inverter Topologies with Power Modules | Application Note | 07/2009 |
| Symmetrical Boost Concept for Solar Applications up to 1000V | Application Note | 01/2009 |
| Innovative Topologies for High Efficient Solar Applications | Application Note | 11/2008 |
| High Efficient Topologies for Next Generation Solar Inverter | Application Note | 07/2008 |
^ top
Motor Integration
| Document | Type | Date |
|---|---|---|
| Motor Integrated IPM-Solution for Servo Drive Applications (PCIM-China 2006) | Application Note | 01/2006 |
^ top
Industrial Drives
| Document | Type | Date |
|---|---|---|
| Intelligent Structure of Power Modules - flowPHASE 0 | Application Note | 05/2004 |
| flow90PIM1 - an innovative Power Module with 90° mounting angle | Application Note | 10/2005 |
^ top
Automotive & Traction
| Document | Type | Date |
|---|---|---|
| Standard Modules Supporting Ultra High Motor Speed for Electric Vehicle | Application Note | 12/2006 |
^ top
REFERENCE DESIGNS
| Document | Type | Date |
|---|---|---|
| Evaluation board description for flowIPM 1B power modules (P95x) | Reference Designs | 03/2011 |
| Evaluation board description for flowPIM 1 power modules (P58x) | Reference Designs | 09/2011 |
^ top