New Products
Extension of flowSOL 0 Family for Single-Phase Solar Inverter Applications
New power modules for transformerless 600V solar applications
Vincotech has extended its offering of power modules to meet the demands of single-phase solar applications. Part of the flowSOL 0 family, these new modules feature a booster and inverter (H-bridge) in the same flow0 12mm housing.
Engineered especially for transformer-less 600V solar applications, the new flowSOL 0 modules leverage the latest Infineon CoolMOSTM C6 technology and SiC diodes to deliver superior performance and satisfy very high demands for efficiency.
General Features:
- High switching speed with CoolMOSTM in the booster and on the inverter’s low side
- Kelvin emitter for best switching performance
- Low inductive pin-out
- Temperature sensor
- flow 0 2-clip 12mm housing
- Pre-applied thermal interface material (optional)
Applications:
- Solar inverter
- UPS inverter
Family Overview:
| Part.-No. | Voltage | Power | Technology |
|---|---|---|---|
| 10-FZ06BIA041FS01-P898E10 | 600V | 5,0kW | COOLMOSTM C6 + SiC in booster NEW |
| 10-FZ06NBIA099FS-P893E | 600V | 1,8kW | COOLMOSTM C6 + SiC in booster and inverter NEW |
| 10-FZ06NBIA070FS-P894E | 600V | 3,0kW | COOLMOSTM C6 + SiC in booster and inverter NEW |
| 10-FZ06NBIA045FH-P897E | 600V | 4,0kW | CP + SiC in booster and inverter |
| 10-FZ06BIA045FH01-P897E10 | 600V | 4,0kW | CP + SiC in booster |
| 10-FZ06BIA045FH02-P897D | 600V | 4,0kW | CP + SiC in booster and inverter - open collector |
Schematics:
The flowSOL 0 power module family is in serial status and samples are available.
Vincotech has also additional modules and information for transformer-based and 3 phase solar application.
Vincotech can also offer other NPC modules.
CoolMOSTM is a registered trademark by Infineon Technologies.
